:bump;My blokey (husband) refused to have a fistula for a year and a half. He had a chest cath and then he tried PD. It wasn't until the PD failed that he relented and allowed them to put a fistula in. His main worries were the pain at dialysis sessions (he'd seen a lot of people with fistulas experience a lot of pain at dialysis) and the lumpy-ness that was bound to occur. He's never experienced the pain that he was so worried about and I actually think that now he's getting a little lumpy-bump (he's been on haemoD for about three months now) he's quite proud of it.I hope that your surgery goes well. It sounds like you have a lot to contend with! Good luck!
Piece of cake, its really pretty simple in and out....
In medical talk, it apparently currently has a flow-rate of 250 ml/ hour, is that bad, good or in between?
Quote from: bluesgirl on May 12, 2011, 01:33:43 PMIn medical talk, it apparently currently has a flow-rate of 250 ml/ hour, is that bad, good or in between?Before your fistula the flow rate would have been around 100 ml/hr at rest.250 ml/hr is too low for dialysis — the machine is generally set to take 300/400 ml/hr or so.Your fistula will develop, the vein will increase in size because it has a high pressure connection direct to your artery. When developed, your flow rate should be at least 1000 ml/hr and probably around 1500 ml/hr.