Pure Flow setting doesn't match Sak

[Roadrunner]

Hi,
If the pureflow setting doesn't match the sak, what happens.   
Example:  Pure Flow is set for Sak-01 and you use SAK-02 or visa versa.

[jbeany]

It won't let you pass the testing phase, and you have to drain the whole batch and start over, making sure to reset the Sak number to match.

(Been there - done that!)

[Roadrunner]

It won't let you pass the testing phase, and you have to drain the whole batch and start over, making sure to reset the Sak number to match.

(Been there - done that!)

It will.  I have been running it this was for 4 weeks.

[jbeany]

Mine wouldn't pass the conductivity test when I did by accident after I had to change out the control unit.